How To Vertically Mount Your GPU

Although many GPUs can be mounted vertically you shouldn’t always go down with this approach. This is particularly true if you wish to demonstrate RG lighting to your buddies. You’ll be happy to know how mounting your GPU vertically can help you achieve that dream and get more looks.

How do you align your graphics card vertically? Many people ask this question only to give up because it requires some knowledge and technical skills. However, don’t lose hope, as this guide provides step-by-step instructions for mounting your graphics card vertically.

Additionally the article will provide important points to keep in mind when mounting the GPU vertically. We’ll also look at the advantages of mounting the GPU vertically. Let’s begin.

Why Would You Vertically Mount A GPU?

Before we explain what you need to do, you should consider all the pros and cons.

The main reason for doing this is to increase the curb appeal of your rig. Why? Nowadays, the bottom of most graphics cards is their most attractive side because you can see more of the fans and RGB there.

We don’t see that, though, as the majority of PC cases and motherboards are designed to have the GPU on its side. The “right side” of the graphics card can be positioned vertically so that it is facing up. This is especially useful for situations involving a window panel.

Another advantage is that GPU sag is completely eliminated when the card is placed vertically.
There is a catch, though!

Regarding vertical installation, the news is not entirely positive. There are a few notable drawbacks. The fact that placing your GPU in this manner blocks access to all other PCIe lanes on your motherboard is a significant drawback.

Additionally, it may obstruct case ventilation, which is crucial for maintaining low GPU temps. Due to the card’s fans being too close to the case panel, this occurs. If the panel is made of glass, the issue is significantly worse.

Remember that there are situations in which the airflow through your computer might be improved by a vertical mount.

The drawbacks aren’t anything too severe, either. Go ahead if you want to disregard them and carry out this project as planned.

Tips for Vertically Mounting a GPU

Before you embark on this journey, there are a few things you should consider before installing your GPU vertically.

The capacity of the PC casing to breathe is commonly impeded by vertically mounted graphics cards. This may be avoided by installing two intake fans in the front and one exhaust fan in the back of the case.

Your graphics card’s width cannot be wider than the 2.5–2.7 slot width. If your graphics card is bigger, we suggest investing in a new case with a vertical mounting bracket to prevent airflow restriction. This is because if your GPU takes up more space, congestion will cause your fans to run at a higher frequency and voltage. As a result, your graphics card will become hotter.

Let’s get to the action now that you are aware of the crucial elements!

Steps to Take During Vertical GPU Mounting

There are a few concerns with some scenarios when installing your GPU vertically. If you have a dual-slot card, they either go too close to the side panels or choke off your graphics card.

However, if you don’t want to replace your case and still need a vertical mount, purchasing an aftermarket vertical mount adapter is your best bet.

There are many options accessible, but what you choose will ultimately depend on your own choice. Once you have decided which aftermarket vertical mount adapter best fits your budget, we may go on to the next step.

Step 1: Unboxing

This relatively simple process simply requires you to unbox your aftermarket vertical mount adapter. Why are we bringing this up now? Given that, you should be aware of the tools you will be given.

The first component you’ll notice is the riser card, a PCIe express link that joins your graphics card to your motherboard.

You will then see a 90-degree display port because of the way your GPU is going to attach, which necessitates a little notch in the case so you can reach it. Depending on the aftermarket component you choose, you could get two 90-degree display port cables, which is nice.

The adapter plate itself, along with a few screws, are then revealed. Quite nice, no?

Because the majority of aftermarket adapters need about seven slots, you must make sure your case has them available. After that, let’s go on to the next phase.

Step 2: Attach the Adapter Plate

When you have all the required components, you should attach the adapter plate. Make sure the plate’s notches are towards the side of the motherboard to help the plate stay attached to your case.

Once the integrity of the attachment has been confirmed, fasten the plate using standard screws. The screws used in PCIe adapter repairs are exactly these ones. Before continuing, make sure the adapter plate and bottom piece are correctly attached. Since you will instal the riser card from this area, it is advised that you do this.

You should then proceed to drill holes and use the provided screws to attach these plates. It is fairly easy to accomplish this, so it won’t take much of your time or effort.

Step 3: Connect the Riser Card

Make sure the holes on the riser card are lined up with your bottom piece once you’ve attached the bottom piece. Make sure the riser piece is correctly positioned. Apply your screws, then snugly tighten the riser.

Step 4: Connect the Graphics Card

So far, everything is OK, right? This method is not too difficult. After attaching your graphics card to your riser card, use screws to keep it in place.

The connection process is quite similar to a horizontal GPU connect. The vertical mount is then ready to be fitted to your case after that.

Step 5: Connect the Ribbon

In this step of vertically installing a GPU, the motherboard must be linked to the ribbon of the riser cable. After fastening it to the case, screw the mounting bracket into position. As a result of the vertical GPU installation, your PC now has a modern appearance.

Step 6: Ensure that the graphics card’s width is no greater than 2.5 to 2.7 inches

It’s important to keep your graphics card’s width in mind while trying to instal the GPU vertically. It could cause an airflow restriction if it is greater than 2.5 to 2.7 inches.

If the GPU occupies a significant amount of space, the fan will run at a higher voltage and frequency owing to congestion. In this scenario, the graphics card will experience higher heat, which will affect its performance. Fortunately, you may entirely avoid this issue by buying a larger graphics card with a vertical mounting bracket.

Step 7: Install an Exhaust Fan

Another suggestion to help prevent issues when mounting a GPU vertically is to instal two intake fans on the front side of the computer case. Installing an exhaust fan on the back of the PC case will also help to alleviate the issue of the vertically positioned graphics card impeding airflow within the case.

Case Compatibility

Every computer casing is built. Every case is constructed differently. Some are smaller, some are larger, and many fall somewhere in the middle. They are priced differently.

Since not all cases are compatible with vertically installed GPUs, it is essential to be aware of this.

While some cases may be changed to support such a mount, others make it challenging.

Before deciding to move further in this way, make sure you conduct some research on your issue.

To determine if this kind of job has been finished in a situation similar to yours, try searching Google.

There are other cases that may be used for vertical installation right out of the box, such as NZXT’s H510i and H500i (often referred to as the H500i’s predecessor).

All you need in these situations is a PCIe Riser, which takes us to our next subject.

PCIe Riser and Vertical Mount Plate

Cases that weren’t designed for these setups will require the purchase of a PCIe riser and a vertical mount plate. The riser shouldn’t be too expensive, and neither should these be.

When you have those two things, the GPU may now be installed.

Mounting The GPU Vertically in Your Case

Each case requires a different mounting technique, therefore we’ll use an H500i as an example.

First, remove all the necessary screws from the card’s casing before depressing the latch on the motherboard’s PCIe slot.

Then, if necessary, put your vertical mounting plate in accordance with the instructions.

This should be simple to understand.

Your PCIe riser cable should be connected to the top PCIe slot before being mounted horizontally (if required).

Once you’ve finished, attach the cable to your PC using a screwdriver, and you’re all set!

Closing the side panels is advised. Turn on your PC and plug it in. Congratulations if all goes according to plan! The GPU has been successfully placed vertically.

What Are the Advantages of Mounting Your GPU Vertically?

Now that you’re aware of the steps to take when mounting your GPU vertically, let’s look at the prerequisites. Below is a list of benefits of mounting your GPU vertically.

Proper Use of RGB

High-end aftermarket graphics cards are widely available and offer spectacular RGB effects. If you love RGB, you don’t want to miss out on this functionality simply because your GPU is set up horizontally. The GPU should be mounted vertically to make the most of the eye-catching RGB LEDs.

Great Aesthetic Appeal

For your computer to look its best, the GPU should be installed vertically. If you like gaming, this is especially helpful because it improves your whole gaming experience and makes you appreciate the games more.

Provide Physical Support

Another reason to instal your GPU vertically is to minimise drooping, which occurs frequently when graphic cards are positioned horizontally. This often happens because there isn’t enough support and the card can’t hold its weight.


Although installing a GPU vertically doesn’t boost your PC’s speed, it does assist to make it look more appealing. Additionally, if you enjoy gaming, this enhances your enjoyment, particularly if your graphics card features RGB lighting.

If you were unsure of how to proceed, this article has provided you with the instructions you need to take. The best part is that the entire procedure isn’t too expensive, which adds to the excitement of the concept.

What are the benefits of mounting my GPU vertically?

Mounting a GPU vertically can help improve air circulation and reduce the amount of dust that builds up inside the case. It also makes it easier to access other components in the case, since the GPU is no longer blocking airflow. Additionally, it can provide a more aesthetically pleasing look to your gaming setup.

What type of GPU can be vertically mounted?

Most GPUs are designed to be mounted horizontally in a standard desktop computer case. However, many GPU manufacturers offer vertical mounting brackets for their graphics cards, which allow them to be mounted vertically inside the case. Some of these include AMD Radeon and NVIDIA GeForce GPUs.

How do I know if my GPU is vertically mountable?

To determine if your GPU is vertically mountable, you should check the specifications of your graphics card. Many GPUs are designed to be mounted horizontally and may not have the necessary components to be mounted vertically. Additionally, many cases require a special riser cable in order to mount a GPU vertically. If you have any doubts, it’s best to contact the manufacturer for more information.

Please add "Disqus Shortname" in Customize > Post Settings > Disqus Shortname to enable disqus or remove '#' to disable comment section