Are you experiencing GPU sag problems? How do you even cure GPU sag, and should you be concerned about it? Here is a how-to.
Your RTX 3080, one of the best GPUs currently on the market, has finally arrived. It can work efficiently and strongly while maintaining low temperatures.
However, the moment you remove this graphics card from its package, you’ll realise how large and substantial it is in comparison to certain mid-range or low-end GPUs. High-quality materials are frequently indicated by heavier weights. Therefore, that is often a good sign.
Although increased weight may also cause the GPU to sag, that is typically the case. PC gamers and enthusiasts are familiar with the term “GPU sag.”
If you are unfamiliar with this topic, let’s look at what it indicates, whether it is a problem, and how to fix it.
What is a GPU Sag?
Two locations on the housing for the graphics cards have one or two screws holding them in place. The two areas in question are the PCIe slot and the case bracket at the back of the computer case.
The GPU sags downward on the slot when its weight exceeds the case bracket’s or PCIe slot’s tolerance thresholds, which might ruin your build.
The weight load of the graphics card can frequently be supported by strong connections in the slot. Extreme sag, however, can cause severe damage that may even shatter internal components like slots.
IS GPU SAG BAD?
GPU sag often makes your build appear shoddy. Since GPUs and PCI-e slots are designed to withstand a lot of stress, their impact on performance has been minimal, and harm to your components is unlikely. We wouldn’t be concerned if the GPU sag’s look didn’t upset you.
However, high GPU sag levels could be problematic. In the worst situation, a drooping graphics card can finally lose connection with the PCI-e slot. Although there would be no harm, your display could suddenly go dark.
How to fix GPU sag
The graphics card will need further assistance in extreme situations of GPU sag, but minor occurrences don’t need to be fixed. GPU sag may be fixed in various methods, including commercial devices and DIY solutions. Use the one that works best for you because some are more efficient than others.
Holding The Card Using The PCIe Cables
Using the tools you already have at your disposal to solve this issue is a common approach. This expressly alludes to the power cables connecting the PSU and GPU.
Many users run these wires from the bottom for a neater PC appearance. If you are worried about the wires sagging, we suggest running them above the card. This might ease the burden, but it won’t be a permanent solution.
When the wires’ tension slowly begins to give way, the GPU will revert to its relaxed state. It’s also unlikely to be as aesthetically pleasing.
To get around this, try any of the other solutions given below.
PROP IT UP
Another time-tested do-it-yourself fix is to use a sturdy item to support your GPU’s sinking right side. Here, you may be imaginative. People have been observed using chopsticks, pencils, Legos, Funko Pop figurines, and more. Depending on the materials you pick, this method may offer character to your project but may also be unstable.
GPU Support Bracket
Many manufacturers include a GPU support bracket with the card as an extra. It is a lengthy piece of metal or plastic that is put beneath the GPU and gives the card additional support to prevent drooping.
If your GPU does not already come with a support bracket, you may purchase one. For a funky flair, some support brackets additionally have RGB lights.
To install the GPU bracket, follow these instructions:
- The PC’s power connection should be disconnected.
- The case’s side panels should be removed.
- The GPU is now clearly seen connected to the slots.
- Close to the graphics card, attach the support bracket to the casing.
- The cardholder should then be fastened to the main support arm.
- Last but not least, modify the cardholder to support the card and keep the GPU from drooping.
Mount The GPU Vertically
You ought to have chosen one of the solutions above by this point.
The best option could be to install your GPU vertically if none of these suggestions appeals to you particularly or if you don’t feel like spending money on a support bracket or accessories.
Remember that you can only do this if your situation permits it.
We suggest visiting the manufacturer’s official website to see whether a vertical mount is feasible in your situation. They ought to be knowledgeable about this subject.
A PCIe riser is necessary for a vertical setup, but you can get one for about $15.
There is a tonne of them around. Purchase one and insert it; that’s all there is to it. Simple as that.
These are an excellent choice if you’d prefer to go with anything like this because they aren’t too pricey either.
Two of our favourites are these. One for a more subdued, businesslike appearance. Furthermore, there is one for times you want to stand out and have some nice RGBs happening.
They both perform well and are reliable.
How to install a GPU brace
Installing a GPU brace is one of the greatest remedies for the sagging issue.
- The first action to take is to shut off the computer.
- Remove the side panel from the PC case.
- From the side, the GPU and the bracket on the case where it is fixed should be visible.
- Make sure there is space for the brace to be installed on the casing and under the GPU, respectively.
- By being slotted into the vacant slot, the brace may support the weight of the graphics card above it.
- Some props just require one open slot, while others require three slots and three screws to fasten to the case.
The EZDIY-FAB and upHere G276ARGB GPU Support Brackets are stand-based braces that are incompatible with these installation instructions. The JEYI iBrace-8 and the CoolerMaster MasterAccessory ARGB GPU Support Bracket are two additional stand-based braces.
Because they don’t require screws or open slots on the casing, stand-based braces are simpler to instal. Open the side panel, set the brace on the case’s floor, and then raise the support arms so they are pointing toward the GPU to support it.
Quick DIY Methods
You can attach the GPU to the top of the PC case using wires like zip ties, yarn, or floss. But if you choose that course, utilize a fishing wire. The fishing wire can keep itself mostly hidden while securely holding the card.
Another do-it-yourself solution is to use tall toy figures, such as Lego or Funko Pop figures, to support the GPU’s sagging side.
Most GPUs sag because of minute gaps between the card and the enclosure. Gently shake your GPU to check for any signs of play; wedge foam blocks or machine screws between the holes to limit movement.
GPU sag is a concern for many people, which is why many remedies are available. We should have covered a few more do-it-yourself solutions, such as securing the graphics card vertically by connecting a cable to the top of your case.
Is GPU sag severe enough to warrant any form of intervention, though? Do you need a support bracket from the nearby PC store immediately? No, is the response. You are not obligated to do so right now or in the future.